RACOM MG102i, Operating Manual

Page: 9 / 175

2. MG102i in detail
Fig. 2.1: MG102i front and terminal panel
All MG102i Wireless Routers run MG102i Software. Software offers the following key features:
• Interfaces and Connection Management (Section 7.2, “INTERFACES”)
○ Dial-out (permanent, on switchover, distributed)
○ Link Supervision
○ Fallback to backup profile or SIM
○ SIM and PIN management
○ Automatic or manual network selection
○ Ethernet (LAN, WAN, bridging, IP passthrough, VLAN management)
○ USB (autorun, device server)
○ Serial port (login console, device server, protocol server, SDK)
○ Digital I/O
○ WiFi/WLAN
○ GNSS (with a valid GPS license)
• Routing (Section 7.3, “ROUTING”)
○ Static Routing
○ Extended Routing
○ Multipath Routes
○ Multicast
○ BGP
○ OSFP
○ Bridging
○ Mobile IP
○ Quality of Service (QoS)
• Security / Firewall (Section 7.4, “FIREWALL”)
○ NAPT / Port Forwarding
○ Stateful Inspection Firewall
○ Firewall
• Virtual Private Networking (VPN) (Section 7.5, “VPN”)
○ OpenVPN Server/Client
○ IPsec Peer
9 © RACOM s.r.o. – MG102iGPRS/UMTS/HSPA+/LTE router
MG102i in detail