WAN mode enables the following possibilities:
DHCP client:
The IP configuration will be retrieved from a DHCP server in the network. No further
configuration is required (you may only set MTU).
Static IP:
IP configuration will be set manually. At least the Default gateway and the Primary
DNS server must be configured along with the IP address and subnet mask.
PPPoE:
PPPoE is the preferred protocol when communicating with another WAN access
device (like a DSL modem).
Username:
PPPoE user name to be used for authentication at the
access device.
Password:
PPPoE password to be used for authentication at the
access device.
Service Name:
Specifies the service name set of the access concentrat-
or. Leave it blank unless you have many services and
need to specify the one you need to connect to.
Access Concentrator
Name:
This may be left blank and the client will connect to any
access concentrator.
MG102iGPRS/UMTS/HSPA+/LTE router – © RACOM s.r.o.
34
Web Configuration
Summary of Contents for MG102i
Page 2: ......
Page 147: ...147 RACOM s r o MG102iGPRS UMTS HSPA LTE router Web Configuration...
Page 174: ...174...
