snmpset -v 3 -u admin -n "" -l authNoPriv -a MD5 -x DES -A admin01admin01 192.168.1.1
1.3.6.1.4.1.33555.10.40.10.0 i 1
•
To run a configuration update:
snmpset -v 3 -u admin -n "" -l authNoPriv -a MD5 -x DES -A admin01admin01 192.168.1.1
1.3.6.1.4.1.33555.10.40.11.0 s "http://server/directory"
Note
config Update expects a zip-file named <serial-number>.zip in the specified directory which
contains at least a "user-config.zip".
Supported protocols are TFTP, HTTP(s) and FTP.
Specifying a username/password or port is not yet supported.
•
get configuration update status:
snmpget -v 3 -u admin -n "" -l authNoPriv -a MD5 -x DES -A admin01admin01 192.168.1.1
1.3.6.1.4.1.33555.10.40.12.0
The return value can be one of: (1) succeeded, (2) failed, (3) inprogress, (4) notstarted.
•
run software update:
snmpset -v 3 -u admin -n "" -l authNoPriv -a MD5 -x DES -A admin01admin01 192.168.1.1
1.3.6.1.4.1.33555.10.40.13.0 s "http://server/directory"
•
get software update status:
snmpget -v 3 -u admin -n "" -l authNoPriv -a MD5 -x DES -A admin01admin01 192.168.1.1
1.3.6.1.4.1.33555.10.40.14.0
Return value can be either of: (1) succeeded, (2) failed, (3) inprogress, (4) notstarted.
SNMP Configuration
Administrative status:
Enable or disable the SNMP agent
Operation mode:
Specifies if agent should run in compatibilty mode or for SNMPv3 only
Contact:
System maintainer or other contact information
Location:
Device location
Listening port
SNMP agent port
121
© RACOM s.r.o. – MG102iGPRS/UMTS/HSPA+/LTE router
Web Configuration
Summary of Contents for MG102i
Page 2: ......
Page 147: ...147 RACOM s r o MG102iGPRS UMTS HSPA LTE router Web Configuration...
Page 174: ...174...
