Redirect address
Specifies an IP address to which log messages should be redirected to. A tiny
system log server for Windows is included in TFTP32 which can be provided
if requested.
In general, the unit comes with an internal flash device which can be used to store data or you can use
the external USB disk.
Flash root
The root partition of the internal flash.
USB disk
A storage disk connected to the external USB port.
LEDs
LED Settings:
You can configure the behaviour of the status LEDs on the front panel of your
device. They are usually divided into two banks - left (M!DGE) or upper (MG102i)
for the digital IO port status or right (M!DGE) or lower (MG102i) for the connection
status indication. You may configure toggle mode, so that the LEDs periodically
show both bank states. See the LEDs description in Section 4.3, “Indication LEDs”.
Bootloader
Password
The password used to unlock the bootloader. If empty, the admin password will be used.
Time & Region
Network Time Protocol (NTP) is a protocol for synchronizing the clocks of computer systems over
packet-switched, variable-latency data networks. M!DGE/MG102i can synchronize its system time with
an NTP server. If enabled, time synchronisation is usually triggered after a WAN link has come up but
before starting any VPN connections. Further time synchronisations are scheduled in the background
every 60 minutes.
127
© RACOM s.r.o. – MG102iGPRS/UMTS/HSPA+/LTE router
Web Configuration
Summary of Contents for MG102i
Page 2: ......
Page 147: ...147 RACOM s r o MG102iGPRS UMTS HSPA LTE router Web Configuration...
Page 174: ...174...
