Supported MIBs
Parameter
HOST-RESOURCES-MIB (RFC2790)
.1.3.6.1.2.25
SNMP-FRAMEWORK-MIB
.1.3.6.1.6.3.10
SNMPv2-SMI (RFC2578)
.1.3.6.1.6.3.11
LLDP-MIB
.1.0.8802.1.1.2
LLDP-EXT-MED-MIB
.1.0.8802.1.1.2.1.5.4795
VENDOR-MIB
.1.3.6.1.4.1.33555
The VENDOR-MIB tables offer some additional information over the system and its WWAN, GNSS
and WLAN interfaces. They can be accessed over the following OIDs:
Vendor MIB OID Assignment
Parameter
.1.3.6.1.4.1.33555.10.40
NBAdminTable
.1.3.6.1.4.1.33555.10.50
NBWwanTable
.1.3.6.1.4.1.33555.10.51
NBGnssTable
.1.3.6.1.4.1.33555.10.53
NBDioTable
.1.3.6.1.4.1.33555.10.60
NBWlanTable
.1.3.6.1.4.1.33555.10.22
NBWanTable
Note
GNSS and WLAN are accessible only in MG102i units.
M!DGE/MG102i extensions contain support for:
•
Rebooting the device
•
Updating to a new system software via FTP/TFTP/HTTP
•
Updating to a new system configuration via FTP/TFTP/HTTP
•
Getting WWAN/GNSS/WLAN/DIO information
Note
Attention must be paid to the fact that SNMP passwords have to be more than 8 characters
long. Shorter passwords will be doubled for SNMP, e.g. 'admin01' becomes 'admin01ad-
min01'.
SNMP extensions can be read and triggered as follows:
•
To get system software version:
snmpget -v 3 -u admin -n "" -l authNoPriv -a MD5 -x DES -A admin01admin01 192.168.1.1
1.3.6.1.4.1.33555.10.40.1.0
•
To get a kernel version:
snmpget -v 3 -u admin -n "" -l authNoPriv -a MD5 -x DES -A admin01admin01 192.168.1.1
1.3.6.1.4.1.33555.10.40.2.0
•
To get a serial number:
snmpget -v 3 -u admin -n "" -l authNoPriv -a MD5 -x DES -A admin01admin01 192.168.1.1
1.3.6.1.4.1.33555.10.40.3.0
•
To restart the device:
MG102iGPRS/UMTS/HSPA+/LTE router – © RACOM s.r.o.
120
Web Configuration
Summary of Contents for MG102i
Page 2: ......
Page 147: ...147 RACOM s r o MG102iGPRS UMTS HSPA LTE router Web Configuration...
Page 174: ...174...
