QuercusVL Programming Manual
<SuperiorLimit>40</SuperiorLimit>
<Percentage>15</Percentage>
</Range2>
<Range3>
<InferiorLimit>40</InferiorLimit>
<SuperiorLimit>60</SuperiorLimit>
<Percentage>17</Percentage>
</Range3>
<Range4>
<InferiorLimit>60</InferiorLimit>
<SuperiorLimit>80</SuperiorLimit>
<Percentage>16</Percentage>
</Range4>
<Range5>
<InferiorLimit>80</InferiorLimit>
<SuperiorLimit>100</SuperiorLimit>
<Percentage>11</Percentage>
</Range6>
<Range6>
<InferiorLimit>100</InferiorLimit>
<SuperiorLimit>-1</SuperiorLimit>
<Percentage>21</Percentage>
</Range6>
</DistributionOccupation>
</Summary>
8.1.1.3. Speed summary
The name of the XML file is <SummaryId>.xml , where “SummaryId” is the summary identifier
left padded with zeros until reaching eight digits. The contents of the file is the following:
●
Summary: contains all data from the summary.
●
Unit: unit identifier.
●
Detector: detector identifier.
●
DetectorType: type of detector; SPEED for a speed detector.
●
Period: period when data was collected.
●
From: start of the period.
●
Seconds: showed in seconds since 00:00h on 01-01-1970.
●
Date: date showed with format yyyy-mm-dd (year-month-day).
●
Time: time showed with format hh:mm:ss (hours:minutes:seconds).
●
To: end of the period.
●
Seconds: showed in seconds since 00:00h on 01-01-1970.
●
Date: date showed with format yyyy-mm-dd (year-month-day).
●
Time: time showed with format hh:mm:ss (hours:minutes:seconds).
●
Volume: number of detected vehicles.
●
AvgHeadway: the average distance headway of vehicles ; in seconds.
●
AvgSpeed: average speed: in kilometres per hour. If speed calculation was not
possible for all vehicles, its value will be -1.
●
AvgLength: average length of vehicles: in millimetres. If length calculation was
not possible for all vehicles, its value will be -1.
Quercus Technologies
218
