Equipment Description
49
Buzzer Configuration
Enables/disables the sounding of an alarm when an error message or warning alarm is displayed.
Enables/disables the beep sound when you press a keypad key.
❐
To enable the error alarm use the
LEFT
key to select the ErrAlarm field. Use
UP
or
DOWN
to
select "Y" to enable alarm or "N" to disable alarm. When the error alarm is enabled, a continuous
alarm tone will sound in the event of an error message. The alarm will sound until the condition
that caused the error has been removed or any key is pressed. To clear an error message from the
display, press
ALT
and
ENTER.
❐
If you wish to change the status of the keyboard beep, use the
RIGHT
key to select the Kybd field.
Use
UP
or
DOWN
to select "Y" to enable a beep when you press a key or "N" to disable the beep.
Note
BUZZER CONFIGURATION default: Err Alarm: N, Kybd: Y
❐
Press
ENTER
to make the changes effective or press
ESC
to
return to previous menu item.
Set SCSI ID
Lets you select the SCSI ID for the robotics on the library.
❐
Use
UP
and
DOWN
to select the desired ID. Press
ENTER
to execute the change. Confirm the
change by pressing
ENTER
again.
Note
SET SCSI ID default is Library’s SCSI ID:1.
Summary of Contents for Scalar 218FC
