![background image](http://html1.mh-extra.com/html/quantum/scalar-218fc/scalar-218fc_user-manual_3955421045.webp)
Configuring the Fibre Channel Subsystem
35
scsiConfigResetFlag
Read/Write
Toggle SCSI Reset Operation. TRUE indicates that
the SCSI bus will be reset on boot.
fctoSCSIMapTable
A Table containing the Fibre Channel-to-SCSI Map.
fctoSCSIMapEntry
An entry in the Fibre Channel-to-SCSI Map Table.
fctoSCSIMapIndex
Read Only
Index into the Fibre Channel-to-SCSI Map (SCSI
LUN).
fctoSCSIbus
Read/Write
SCSI bus number.
fctoSCSItarget
Read/Write SCSI
ID.
fctoSCSILUN
Read/Write
SCSI LUN.
scsitoFCMappingTable
A Table containing information describing how SCSI
channels are mapped to the Fibre Channel.
scsitoFCMapEntry
An entry in the SCSI-to-FC Mapping Table.
scsitoFCMapIndexBus
Read Only
Index into the SCSI-to-FC Map. SCSI bus number
scsitoFCMapIndexSCSIID
Read Only
Index into the SCSI-to-FC Map. SCSI ID.
scsitoFCMapIndexLUN
Read Only
Index into the SCSI-to-FC Map. SCSI LUN.
scsitoFCMapDestID
Read/Write
The Fibre Channel Node number.
scsitoFCMapLUNlo
Read/Write
SCSI LUN low bytes.
scsitoFCMapLUNhi
Read/Write
SCSI LUN high bytes.
fcNPortPhysTable
A Table containing N_Port Physical Characteristics.
fcNPortPhysEntry
An entry in the N_Port Physical Characteristics Table.
fcNPortPhysNPortIndex
Read Only
A unique number that identifies an N_Port/NL_Port.
This number ranges from 1 to the value of
fcNodeNumNPorts and its value remains constant for
the identified N_Port/NL_Port until the management
agent of the Node is re-initialized.
FcNPortSpeed
Read Only
The transmission rate, an FC-0 physical characteristic.
fcNPortMedia
Read Only
Type of media, an FC-0 physical characteristic.
fcNPortTransmitterType
Read Only
Type of transmitter, an FC-0 physical characteristic.
fcNPortDistance
Read Only
The maximum distance, an FC-0 physical
characteristic.
fcNPortLinkState
Read Only
The state of the FC link. Pending indicates that the
initialization is still pending. Failed indicates that link
initialization has failed. Successful indicates that the
FC Link has initialized successfully.
fcNPortRTTOV
Read Only
Receiver_Transmitter timeout value, used by the
receiver logic to detect Loss of Synchronization.
Parameter Read/Write
Description
fcNPortTopologyModel
Read Only
The topology model on the Link. The N_Port/NL_Port
may be attached to a Fabric, or attached to another
N_Port or to FC-AL (Arbitrated Loop). This value is
only meaningful if the FC Link has initialized
successfully. (i.e. fcNportLinkState = Successful)
Summary of Contents for Scalar 218FC
