![background image](http://html1.mh-extra.com/html/quantum/scalar-218fc/scalar-218fc_user-manual_3955421044.webp)
34
Configuring the Fibre Channel Subsystem
ADIC Private MIB
The following chart lists all attributes that can be specified using the ADIC private SNMP MIB. Included
with each attribute are the attribute’s read/write property and a brief description of the meaning of values
read or written.
Parameter Read/Write
Description
fcConfigNodeName
Read/Write
Worldwide name of a collection of N_Ports that
comprise a Node.
fcConfigNodeNumNPorts
Read Only
Number of N_Ports that comprise the named Node.
fcConfigEnableReset
Read/Write
Toggle for software reset. True indicates that resetting
the product via SNMP is allowed. NOTE: each time
the product is initialized this object is set to FALSE
(i.e. it is not sticky).
fcConfigUseHardAddress
Read/Write
Toggle for address configuration. True indicates that
configuration of the source ID is allowed. False
indicates that the source ID may not be changed.
fcConfigSourceID
Read/Write
3 byte Source address. For arbitrated loop, this will be
the Hard Assigned AL_PA (preceded by 20 bytes).
fcConfigSCSIMode
Read/Write
Fibre Channel-to-SCSI mapping mode.
fcConfigTraceMask
Read/Write Trace
Level.
fcConfigReset
Read/Write
Reset the product. Setting this object to TRUE will re-
start all the software (similar to powering the product
off, then on). The reset will only take place if
fcConfigResetEnable is also TRUE. NOTE: resetting
the product will disconnect all current Fibre Channel
connections.
fcConfigCommit
Read/Write
Commit the configuration values to the flash memory.
miSerialBaudRate
Read/Write
The baud rate for the serial interface.
miMACAddress
Read/Write
Physical address (MAC address).
miethernetIPAddr
Read/Write
The IP address for this device.
miethernetIPNetmask
Read/Write
Ethernet Net Mask.
miCommunitySet
Read/Write
SNMP Community name for Sets. Not supported.
miCommunityGet
Read/Write
SNMP Community name for Gets. Not supported.
scsiConfigTable
Read/Write
A Table containing SCSI Configuration parameters.
scsiConfigEntry
Read/Write
An entry in the SCSI Configuration Table.
scsiConfigIndex
Read Only
Index into the SCSI Configuration Table.
scsiConfigInitID
Read/Write
Initiator SCSI ID.
scsiConfigTargetIDAdd
Read/Write
Set this SCSI target ID.
Parameter Read/Write
Description
scsiConfigTargetIDRemove
Read/Write
Remove this SCSI target ID. The SCSI ID you specify
will no longer be a target.
Summary of Contents for Scalar 218FC
