Quantum Scalar 218FC, User Manual

Page: 19 / 127

Getting Started 9
Prepare and Install the Data Cartridges
Barcode Labels
To install the barcode labels, position the label with the numbers upright, as shown in the illustration below,
sliding the label under the ridges on the sides of the cartridge recess.
Barcode Labels
Write-Protect Switch
1. Set the write-protect switch (see illustration below) on each cartridge to the appropriate position. Use
your finger to push the switch in one of the directions shown in the following illustration.
DLT Cartridge Write-Protect Switch
Write-protect
Switch
Orange
Indicator
Write-protected
Write-enabled