![background image](http://html1.mh-extra.com/html/quantum/scalar-218fc/scalar-218fc_user-manual_3955421107.webp)
Scalar 218FC Rack-Mount Installation
97
Preparing the Rack
Tools Required
—
# 1 phillips screwdriver
—
11/32” nutdriver
❐
Match the holes in the mounting flange of an outer rail to the holes in your rack upright. You must
use holes that have the same spacing when mounting the Scalar in your rack.
The rails will be secured to the uprights with a phillips screw and a spacer. There are two sets of spacers
included in the rack mounting hardware. The largest spacers are to be used if the holes in your rack
uprights are square. If the holes are round, use the small spacers.
Line up the holes in the rack upright
and the outer rail mounting flange
Summary of Contents for Scalar 218FC
