![background image](http://html2.mh-extra.com/html/quantum/faststor-1/faststor-1_user-manual_3568628015.webp)
3
Installation
This chapter provides step-by-step instructions on how to properly prepare and
install the ADIC FastStor 1.
READ ME FIRST
CAUTION! !
YOU MUST REMOVE THE ROBOT TRANSPORT LOCK
WHEN POWERING UP THE UNIT FOR THE FIRST TIME
OR IT WILL NOT OPERATE.
SEE THE PROCEDURE ON THE FOLLOWING PAGES.
Performing the Installation
To install the FastStor 1, complete the following steps.
Step 1. Unpacking the FastStor 1
Carefully unpack the unit from the shipping container. Save the container and
packing materials in case you need to transport the FastStor 1 in the future. The
packaging is specifically designed for the loader to ensure it is not damaged during
transportation.
Review the contents of the shipping container to be sure that all parts were
included in the shipment. A standard package for the FastStor 1 consists of the
following items:
•
A factory-assembled FastStor 1 unit containing two cartridge magazines.
•
A Standard Accessory Kit containing:
-
1 Warranty/Registration Card
-
Rack Mount Hardware Kit
-
2 Line Power Cords: one for USA/Japan and one for European
power outlets
-
1 VHDCI SCSI Interface Cable
-
1 68-pin VHDCI LVD/SE SCSI Terminator
-
1 Ethernet cable
-
Tool for Emergency Magazine Release
-
Media barcode label kit (contains media labels and cleaning
FastStor 1 Installation and User Guide
9