Figure 4.16 Removing the magazine from the loader
Inserting Cartridges into the Magazine
When inserting cartridges, the access door of the cartridge must face the
magazine. Push it carefully into the magazine until it locks in place. The rear side
of the cartridge with the Write Protect switch and the barcode label must face out.
Make sure the cartridges latch properly.
Figure 4.17 Gently push the cartridge into the magazine slot
Removing Cartridges from the Magazine
Press the cartridge release tab towards the cartridge until the cartridge is released.
The cartridge slot is spring loaded, so it is important to prevent the cartridge from
popping all the way out.
If the cartridge falls down, it might be damaged and data
FastStor 1 Installation and User Guide
37
