the main menu entries except the View Data entry is selected, the loader will go to
its busy state, and SCSI commands will be terminated with Check Condition and
Not Ready status.
Setup Menu
To enter this menu, scroll to the Setup item in the Main Menu and press the Select
button. The loader enters the busy state when this menu is selected.
Item name
Description
FastStor 1 setup
This menu item gives access to the FastStor 1 setup
menu.
SCSI setup
This menu item gives access to the SCSI bus setup
menu. Both the FastStor 1 and the Drive SCSI bus
setup are available here.
Remote
Management
setup
This menu item gives access to the Remote
Management setup menu. It allows the operator to
enable, disable and configure the Loader Web
interface.
FastStor 1 setup
The number of selectable values for each FastStor 1 setting are listed in the
following table.
Item name
Legal values
.
Default value
Cleaning Slot
Legal Slot ID 1..8 or 0 = not
selected.
0 = not selected
Barcode scan*
Enabled, Disabled
Enabled
Audible Alarm
Enabled, Disabled
Disabled
Set Language
English
English
* The barcode of the cartridge in each occupied magazine slot and in the drive (if any) will be
scanned during the Inventory process.
SCSI Setup
The SCSI setup menu allows selecting SCSI addresses for both the loader and its
internal drive. In addition, the SCSI Bus Parity can be enabled or disabled.
Because of the SCSI protocol, the values selected take effect only after the next
reset of the loader and drive.
FastStor 1 Installation and User Guide
29
