![background image](http://html2.mh-extra.com/html/quantum/faststor-1/faststor-1_user-manual_3568628013.webp)
Main Power Switch/ Fuse/Power cord connection
The main power switch is found on the rear of the loader on the power supply
bracket. The power switch, the fuse holder (with a 250V 2A (H) fuse) and the AC
power cord connection are combined in one common unit.
SCSI Interface Connectors
The FastStor 1 has two shielded 68-pin VHDCI SCSI connectors on the rear panel.
The connectors are used for connecting the tape drive and the FastStor 1 to a
SCSI bus. These connectors can link to the following:
•
A shielded male VHDCI SCSI cable
•
A shielded male VHDCI SCSI terminator
Ethernet Port
This port is for the Remote Management system and allows you to connect the
FastStor 1 to a 10/100 BaseT Ethernet network.
FastStor 1 Installation and User Guide
7