Figure 5.4 Remote Management Command Page
Maintenance Pages
On these pages it is possible to select predefined tests and actions to check the
FastStor 1’s reliability. In addition it is possible to upgrade the loader's firmware
over TCP/IP.
Diagnostics
•
Clean the drive by importing a cleaning cartridge.
•
If you choose
Identify loader
, the front panel display light toggles on and
off for 15 seconds. This makes it easy to verify that you are connected to
the correct loader if several loaders are stacked.
•
Test robotics by moving cartridges.
•
Test robotics without moving cartridges.
Debugging
•
Memory dump downloads a snapshot of the loader’s system memory to
a file that can be sent to ADIC service for diagnostic purposes.
•
Memory dump drive downloads a snapshot of the drive’s system memory
to a file that can be sent to ADIC service for diagnostic purposes.
•
Perform a system reset.
•
Media log displays a log of all cartridge movements and a map of the
46
FastStor 1 Installation and User Guide
