Figure 5-13 Park Rear Button on the Home Page
2.
Remove power from both of the libraries by first pressing the power switch off
and then removing the power cord. FastPass elevator expansion modules are
NOT
hot-swappable.
3.
The libraries need to be slightly loosened in the mounting racks for the FastPass
elevator expansion modules to align themselves.
4.
If the storage matrices have not already been removed from both of the libraries,
follow the procedure described in Section 5.7.5 to remove them.
5.
For RLS-8560 libraries ONLY follow steps 5 through 13 to remove the storage
matrix assembly blank.
6.
The blank is secured to the RLS with two captive screw fasteners, which can be
reached by inserting a hand through the opening created when the left side
storage matrix is removed. This is the preferred and simpler option, however if
the screws cannot be accessed through this opening the face of the user interface
panel assembly can also be removed (step 8).
511000 Rev. F
Installation 5-13
