Elevator module cable
LED on upper elevator
expansion module
Figure 5-21 The Elevator Module Cable and LED on Upper Module
21.
There is a small LED light on the upper elevator expansion module where green
indicates that power and data connectivity are good between the upper and lower
modules. A red LED is an indication that one end of the cable is not attached
correctly or one of the libraries is not powered up.
22.
Once the black elevator module cable is attached between the libraries, attach
the power cords to the libraries and turn the main power switch on the rear of
the libraries to on. The standby power switch on the front of the libraries will
begin flashing. Press and release the standby power switch to fully power up the
libraries.
23.
Once both machines are powered up a message will appear on the Home Page
screen stating that a calibration needs to be performed. See Figure 5-22.
511000 Rev. F
Installation 5-19
