Configuration Page
10-5
Field Option
Description
Location
e information is being displayed. T1, T2, T3,
When the FastPass elevator expansion
d, the library locations will read: 1T1, 1T2… 3T1, 3T2, etc all
y up to 4T5 when four RLS-85XX libraries are interconnected.
T1,
T2,…
4T5
The number of the drive whos
T4 or T5 for a single library.
option is use
the wa
Load Status
Empt
e has no cartridge present.
y
The driv
Unloaded
The drive has a cartridge presen
as not been loaded into the
drive.
t, but it h
Loaded
The drive has a cartridge loaded and is ready to read and write.
No Drive
A drive is currently not installed in this location.
Clean Status
Not Cleanable
The drive has a cartridge loaded or has no cleaning cartridge available.
Cleanable
The drive does not have a cartridge loaded
dy to accept a
ridge to begin the cleaning process.
and is rea
cleaning cart
Cleaning
The drive is in the process of using the cleaning cartridge. After the tape
drive has been cleaned, and it has ejected the cleaning cartridge, the
cleaning cartridge is automatically returned to its original location.
Blank
A drive is currently not installed in this location.
If a cartridge is in a drive, but not loaded touching the Load button will
command the tape drive to load the tape cartridge.
Load
When the selected drive has a cartridge loaded, touching the Unload
mand the tape drive to unload the tape cartridge.
Unload
button will com
Clean
s the tape drive to begin the drive cleaning process.
Command
Table 10-1 Operation/Drive Page Description
10.2
Operation/Element Status Pag
The Operation/Element Status page displays specific information about any element
in the library. It displays the same information about a given element that the host
would receive from issuing a SCSI-2 Read El
e SCSI-2
Read Element Status command is described in the RLS SCSI-2 Interface Reference
(Qualstar document 501551). Please refer to this document for a detailed explanation
of all the element status values displayed.
e
ement Status command. Th
511000 Rev. F
