Figure 5-26 The Calibration Screen
29.
Before starting calibration the handler and storage array magazine rows five and
six must be emptied of any tape cartridges in each library.
30.
Press the Calibrate button to begin the calibration process, which may take
several minutes to complete.
31.
After the libraries have successfully been calibrated the current password should
be cleared (removed) to prevent unauthorized access to the private screens.
32.
There are two ways to clear the password, the first involves pressing the
Security Id: on the Home Screen, which will bring up a screen stating “Select Ok
to reset the Security ID to the default setting.” See Figure 5-27.
5-22
Installation
511000 Rev. F
