Upper elevator
expansion module
Secure with 8 Phillips
head screws.
Lower elevator
expansion module
Figure 5-20 Securing the Upper and Lower Elevator Expansion Modules into the Library
19.
Using the four Phillips head screws removed earlier and the four additional ones
included with the FastPass elevator expansion modules, secure both the upper
and lower modules to the rear of the libraries with a Number 2 Phillips
screwdriver.
20.
Take the black elevator module cable and plug it into the connectors on the
upper and lower elevator modules as shown in Figure 5-31. Note that the cable
provides both power and data transfer and can only be acquired from Qualstar. If
a new cable is required please contact technical support and request P/N 667-
0601-1.
CAUTION
Do not attempt to replace the black elevator module cable with a phone cable or
any other cable that has not been provided by Qualstar.
5-18
Installation
511000 Rev. F
