NOTE
Improperly installed tape cartridges will not fully seat in the slots and may prevent installation of
the storage matrix in the library.
5.7.5
Bulk Loading Media in Storage Matrices
Cartridges are easily installed and removed without the use of tools. Note that
matrices are key locked only and the library cannot prevent a user with a key from
opening them.
1.
Unlock the left or right storage matrix with the key. See Section 6.2 for details.
2.
Grasp the matrix at the indentation on its front cover below the key lock.
Installation 5-37
Figure 5-39 Storage Matrix Indentation
3.
Carefully slide the matrix out from the front of the RLS until it stops.
4.
There is a handle built into the top of the storage matrix that must be turned 90
degrees so it is pointing up. When this handle is in the up position the matrix is
ready to be completely removed from the library.
511000 Rev. F
