quadient IN-700 Page 142 User Manual Download

Page: 142 / 280

Budget Preferences

Description

Range

Preference

Budget allocated to the account for the period.

0 to 99999

Amount

Consumed percentage of the budget at which the
system warns the user and the supervisor.

0 to 100%

Warning limit (%)

Percentage of the budget consumed at which the
system blocks postage for the account.

0 to 100%

Locking limit (%)

Surcharge Preferences

The surcharge preferences are set for each account individually.

Description

Range

Preference

The fixed amount to add to the account over the
postage amount.

0.01 to 99

Fixed Rate

The percentage of the postage to add to the account
charge.

1 to 99%

Percentage of imprint

Mana

ging Accounts and Assigning Rights

137

| Page 137 | Jan-13-2017 09:38 |

Summary of Contents for IN-700

























































































































































































































































































Search results

Summary of Contents for IN-700

Reviews:

Related manuals for IN-700

Brands by name

Popular brands

quadient IN-700, User Manual

Search results

Summary of Contents for IN-700

Reviews:

Related manuals for IN-700

Brands by name

Popular brands