quadient IN-700, User Manual, Page: 41 / 280

Frequently Asked Questions
System check list:
Answer Question...
Look at the credit counter at the bottom of the screen,
or:
Press and enter 1 to check your credit balance.
To add credit, see How to Add Credit to the PSD
(Meter) on page 95.
Do I have enough credit?
Clear batch counters if you intend to issue a report
on the mail run you are about to start (see
Batch Data
Report on page 146).
Select Reset counter on the home screen, or
See How to Reset Batch Counters on page 89.
Do I need to clear the Batch
Counter?
For sealing while printing the envelopes.
For sealer-equipped feeders, see How to Fill the
Sealer Bottle on page 243.
Is the sealing/moistening device
properly filled?
(if installed)
Before laying envelope(s) on the weighing platform,
your home screen should display 0 g. If _ g is dis-
played, perform a 'rezero' of the WP.
See How to Rezero the Weighing Platform on page
195.
Is the Weighing Platform prop-
erly zeroed or tared?
See How to Fill the Automatic Label Dispenser on
page 90.
Are labels in place in the ALD?
(if you plan to print on label)
To display the level of ink in the printing headset, see
How to Display Ink Level and Cartridge Data on page
234.
Is there enough ink in the cart-
ridge?
You can be warned when the available credit gets below a pre-set
value (see
How to Set the Low-Credit Threshold on page 190).
36
| Page 36 | Jan-13-2017 09:38 |
3
Pr
ocessing Mail