quadient IN-700 User Manual Download Page 30

Page: 30 / 280

Sleep Mode

You can also turn the Mailing System to Sleep mode manually.

To change the period of time after which the Mailing System
switches to 'Sleep' mode, see

How to Change System Time-Outs

on page 189.

How to Turn the Mailing System to Sleep Mode

Press

(at the top right corner of the control panel).

The light on the key indicates:

Green: the Mailing System is awake and ready for use.

Amber: the Mailing System is in 'Sleep' mode.

To avoid weighing errors, make sure the weighing device platform
is clear when starting the machine.

OFF Mode

To turn OFF your system, you can use the ON/OFF button located on the right side of the
Base.

How to Turn the Mailing System to OFF Mode

Press

(at the top right corner of the control panel).

Be sure that the light on the key

(at the top right corner of the control panel) is

Amber meaning that the Mailing System is in 'Sleep' mode.

Meet

our Mailing System

| Page 25 | Jan-13-2017 09:38 |

Summary of Contents for IN-700

























































































































































































































































































Search results

Summary of Contents for IN-700

Reviews:

quadient IN-700, User Manual, Page: 30 / 280

Search results

Summary of Contents for IN-700

Reviews: