quadient IN-700 User Manual Download

Page: 242 / 280

Check the printed pattern and press the letter that corresponds to the straightest and
complete vertical line.

Press [OK] to validate.

Repeat the previous step until lines F are aligned.

Cleaning the Print Heads

If the printing on envelopes looks unclear or dirty, clean the headset to restore the print
quality.

If the headset has to be cleaned too often, change the automatic cleaning interval as
indicated.

How to Clean the Print Heads Automatically (as a User)

To clean the print heads automatically:

As a user:

Press

and select the path:

Cartridge

Cleaning Process

The cleaning starts automatically.

Maintaining y

our Mailing System

237

| Page 237 | Jan-13-2017 09:38 |

Summary of Contents for IN-700

























































































































































































































































































Search results

Summary of Contents for IN-700

Reviews:

Related manuals for IN-700

Brands by name

Popular brands

quadient IN-700, User Manual

Search results

Summary of Contents for IN-700

Reviews:

Related manuals for IN-700

Brands by name

Popular brands