manualshive.com logo in svg

quadient IN-700, User Manual, Page: 44 / 280

Share
Download
quadient IN-700 User Manual Download Page 44

Printing [Standard] Mail

3.3

In Processing [Standard] Mail Section

This section describes the parameter settings and mail handling sequences for the mailing
processes that use the Type of imprint [Standard], to apply postage using different rates.

See also

• About the use of the Type of imprint, see 

Choosing a Type of Imprint

 on page 29.

Applying Postage for [Standard] Mail

Postage for [Standard] Mail

The procedure below outlines steps in a recommended sequence to process your mail.

• As mail requirements quickly vary, some settings may not be necessary, or their

order may vary.

• You must begin with selecting the Type of imprint to gain access to the additional

options and be able to run your mail (standard is default).

Make sure you have already completed the preparation steps
mentioned in 

Preparing and Starting your Work Session

 on page

31.

How to Set Postage for [Standard] Mail

Required settings:

1.

Make sure you are on the home screen of the [Standard] type of imprint.
The type of imprint is indicated at the top of the home screen as illustrated below.

39

|   Page 39 |  | Jan-13-2017 09:38 |

3

Pr
ocessing Mail

Summary of Contents for IN-700

























































































































































































































































































Reviews:

No comments