quadient IN-700, User Manual

Page: 34 / 280

Choosing a Type of Imprint 3.1
Customizing Your Imprint
To process mail, you must first choose a 'Type of imprint' that matches the type of process
you want to apply to your mail: printing postage for different rates, printing 'Received' and
the date on incoming mail, 'Pass through' for seal only applications.
For each 'Type of imprint' you select, the Mailing System displays all the specifications -
and only those specifications - for the type of process you will use.
Home Screen and Configuration Menu
Each type of imprint is associated to:
• A specific Home Screen that displays current imprint configuration (weight, postage...).
• A specific Imprint Configuration Menu that allows you to set imprint parameters.
To directly gain access to the Configuration Menu of the Type of
imprint, press Short cut Key on the Control Panel.
Your system has five Short cut Keys for direct access to save time.
You can eliminate key strokes for rate selection, imprint memories,
label printing, add or check credit and to customize the imprint.
Type of Process and Type of Imprint
The table below indicates the 'Type of imprint' to choose, depending on the type of process
you want to apply to each set of mail.
The column on the right indicates, for each Type of imprint, the options available for each
type of imprint.
If you do not set any parameter, the Mailing System uses default values.
Available Imprint options Type of imprint Type of process
29
| Page 29 | | Jan-13-2017 09:38 |
3
Pr
ocessing Mail