quadient IN-700 User Manual Download

Page: 213 / 280

Default Sealing Mode

8.11

In supervisor mode, you can set the default sealing Mode (ON or OFF).

This setting is used only if the Mixed-Size Feeder is connected.

How to Set the Default Sealing Mode

To modify the Default Sealing Mode:

In supervisor mode (see

How to Log in as Supervisor

on page 180):

Press

and select the path:

Default User Settings

Base settings

Default sealing

Change the default sealing state as required.

Press [OK] to validate.

Changing the Current Sealing Mode

As a user, you can change the current sealing state as follows.

How Set the Current Sealing Mode

To change the sealing Mode:

As a user:

Press

and select the path:

Job settings

Sealing

The Sealing screen is displayed.

Press the ON/OFF key to change the sealing state and press [OK] to validate.

208

| Page 208 | Jan-13-2017 09:38 |

Configuring y

our Mailing System

Summary of Contents for IN-700

























































































































































































































































































Search results

Summary of Contents for IN-700

Reviews:

Related manuals for IN-700

Brands by name

Popular brands

quadient IN-700, User Manual

Search results

Summary of Contents for IN-700

Reviews:

Related manuals for IN-700

Brands by name

Popular brands