quadient IN-700 User Manual Download

Page: 274 / 280

Recommended Operating
Conditions

12.2

Temperature and Relative Humidity

Your Mailing System should only be operated in the following conditions:

Ambient temperature: +10°C - +40°C.

Temperature range

80% max. without condensation.

Relative humidity

Weighing accuracy

To obtain the best weighing results, use a solid and steady table:

• Away from any doors
• Away from any fan

Dynamic Scale Environment

The Dynamic Scale uses optical sensors: do not install it in an area
exposed to excessive light or heat sources.

269

| Page 269 | | Jan-13-2017 09:38 |

Specifications

Summary of Contents for IN-700

























































































































































































































































































Search results

Summary of Contents for IN-700

Reviews:

Related manuals for IN-700

Brands by name

Popular brands

quadient IN-700, User Manual

Search results

Summary of Contents for IN-700

Reviews:

Related manuals for IN-700

Brands by name

Popular brands