manualshive.com logo in svg

quadient IN-700, User Manual, Page: 68 / 280

Share
Download
quadient IN-700 User Manual Download Page 68

Running [Pass Through] Mail

3.6

In Running [Pass Through] Section

This section describes how to use the [Pass through] type of imprint, for:

• Sealing envelopes using the auto-feeder sealer (if installed).
• Only conveying mail, for counting or testing purposes.

See also

• About the use of this Type of imprint, see 

Choosing a Type of Imprint

 on page 29.

Setting [Pass through] Mail processing

The procedure below outlines steps required to process mail.

You must begin with selecting the Type of imprint to gain access to the corresponding
parameters and be able to run mail.

Make sure you have completed the preparation steps mentioned
in 

Preparing and Starting your Work Session

 on page 31.

How to Set [Pass Through] Mail processing

Main setting:

1.

Make sure you are on the home screen of the [Pass through] type of imprint.

The type of imprint is indicated at the top of the home screen as illustrated.

63

|   Page 63 |  | Jan-13-2017 09:38 |

3

Pr
ocessing Mail

Summary of Contents for IN-700

























































































































































































































































































Reviews:

No comments