manualshive.com logo in svg

quadient IN-700, User Manual, Page: 36 / 280

Share
Download
quadient IN-700 User Manual Download Page 36

Preparing and Starting your
Work Session

3.2

Preparation steps

These preparation steps allow to run your mail more efficiently.

It involves:

• Sorting mail by type and task, to make processing faster (

Sorting Mail by Type

and Task

 on page 31)

• Logging into the system to start a work session (

Turning On Your System and

Starting a Work Session

 on page 32)

• Selecting the Type of imprint that matches each mail batch (

Selecting the Type of

Imprint

 on page 35)

• Checking additional issues concerning your Mailing System: ink level, credit...

(

Frequently Asked Questions

 on page 36)

This section also describes how to use the Mailing System automatic feeder (

Using the

Feeder

 on page 37).

Sorting Mail by Type and Task

To save time, sort your mail in groups that have similar characteristics.

This will prevent you from changing imprint settings too often, and allow you to fully benefit
from the automatic features of your Mailing System, particularly Differential Weighing or
Dynamic scale options that allow you to process mail much quicker.

Follow the steps below to sort your mail into different stacks.

31

|   Page 31 |  | Jan-13-2017 09:38 |

3

Pr
ocessing Mail

Summary of Contents for IN-700

























































































































































































































































































Reviews:

No comments