13
PREMIS200
Quick installation and programming guide
English
IMPORTANT
NOTE
This quick guide is a summary of the complete installation guide. The full guide contains safety
warnings and other explanations that must be taken into account. The most recent version of
this guide and the installation manual are available at the “Downloads” section on Erreka’s
website:
http://www.erreka.com.
The options and functions described in this guide apply for the firmware version indicated on
the circuit. The firmware, as part of a process of continuous improvement, is subject to new
functions or upgrades being included as a result of new versions not compatible with previous
ones. For this reason, some options or functions may differ or be unavailable if your firmware
is older than shown in this guide.
Elements of the complete installation
15 Door
16 Operator
17 Arm: Pull / Push
18 Side switch
19 Activation sensor
20 Safety sensor
21 Selector
22 Emergency Stop
23 Electrical lock
24 Smoke sensor (Fire door)
25 “Hold-open” retention magnets
(Fire resistant door)
26 Door stopper
27 External key
28 Fingers guards
ELECTRICAL CABLES:
Element
Nº wires x section
Remarks
Main power supply
3 x 1,5mm
2
Selector
4 x 0,5mm
2
Screened cable
Safety sensor
6 x 0,5mm
2
Screened cable
Radar
4 x 0,5mm
2
CAN (Double swing doors)
2 x 0,5mm
2
Screened cable
Stop
2 x 0,5mm
2
Emergency
2 x 0,5mm
2
Electrical lock (intercom)
2 x 0,5mm
2
With test; two more wires
Electrical lock (magnetic)
2 x 0,5mm
2
With test; two more wires
Hold-open retention magnets
2 x 0,5mm
2
MS
Y
-010/00 – 2022/10/11
firmw
a
re SW1.1
.4. or later
