quadient IN-700 Page 248 User Manual Download

Page: 248 / 280

Filling and Adjusting the Feed-
er Sealer

10.2

Filling the Sealer Bottle

The Automatic Feeder uses water for sealing envelopes.

If the system is out of water, the mailing process continues but the envelopes will not sealed
properly.

How to Fill the Sealer Bottle

To add water (or sealing solution) to the bottle:

Remove the bottle from its base and turn it over.

Unscrew the cap and fill the bottle with water up to the limit marks.

Screw the cap back and put the bottle back into place.

243

| Page 243 | | Jan-13-2017 09:38 |

Maintaining y

our Mailing System

Summary of Contents for IN-700

























































































































































































































































































Search results

Summary of Contents for IN-700

Reviews:

Related manuals for IN-700

Brands by name

Popular brands

quadient IN-700, User Manual

Search results

Summary of Contents for IN-700

Reviews:

Related manuals for IN-700

Brands by name

Popular brands