![background image](http://html1.mh-extra.com/html/kathrein/eso-180-h/eso-180-h_instructions_3625460001.webp)
1 / 4
ESO 180 H
237500004
ESO 180 HL
237500006
Refl ector Heating Systems for CAS 180
Features
•
Flexible special heating mats with integrated heat insulation
and PTFE insulated heating elements
•
Good heat distribution due to an optimal fi t of the heating
mats on the refl ector
•
Element carrier of aluminium foil, self-adhesive foil strips at
the front
•
Thermal insulation made of bubble wrap with refl ective layer,
4 mm
•
Built-in sensor to additionally defi ne the heating temperature
via a control
About These Instructions
This document is part of the product. These instructions
describe how to install and connect the refl ector heating
systems ESO 180 H, and ESO 180 HL.
►
Do not install or use the devices until you have read and
understood this document.
►
Keep this document for reference throughout the service life
of the devices. Pass this document on to any new owner or
user.
The most up-to-date version of this document can be found at
www.kathrein-ds.com
Scope of Supply
•
4 heating mats with 3.5 m cable (H05RNF) and heating
temperature sensor
•
Mesh reinforced aluminium foil, 0.05 x 17 m
•
Adhesive fi lm (white) for covering the aluminium foil, 0.075 x
17 m
•
4 elliptical segments made of white adhesive foil for covering
the outer contours of the heating mats
•
8 x cable ties, 360 mm
Transport and Storage
►
If possible, transport and store the heating mats in their original packaging.
►
Protect the heating mats against moisture and mechanical damage.
►
Transport and store the heating mats only in the permitted temperature range between -40 and +80°C. Make sure there is no
condensation build-up.
Functional Description
The electric heating prevents snow and ice formation on the antenna refl ector surface which may lead to interruptions in satel-
lite reception. The heating for the antenna consists of four special heating mats with integrated heat insulation and PTFE insulated
heating elements. After installation, the heating mats fi t on the refl ector in an optimum way and guarantee a good heat distribution.
Two of the heating mats have an integrated temperature switch that turns off the heating at 80°C so that the system can be directly
operated at 230 V/50 Hz. To ensure effi cient operation, we recommend the use of a control unit for the ESO 180 H. The control unit can
be operated with the built-in sensor, but also without a sensor. Possible system components:
Operation without temperature
sensor
Operation with temperature sensor
Operation without control possible
ESO 180 H
ESO 97 S
ESO 97 SL
YES
ESO 180 HL
-
ESO 97 SL ESO 99 S
A control unit is mandatory for
operating the ESO 180 HL. For this
purpose, the required temperature
sensor is built into the heating mat.
ESO 180 HL: for exposed loca-
tions, with double the heating
power compared to ESO 180 H
(L = increased performance).