QUAD ACCESS MFX-3590, Scanner And Fax Manual

Page: 72 / 218

1
2
3
Basic faxing 3-9
Basic fax functions
„
Setting the contrast
You can set the contrast to scan with according to the document.
Lightest:
Lighter:
Normal:
Darker:
Darkest: Select to scan with the lightest contrast.
Select to scan with a contrast between the normal contrast and the lightest contrast.
Select to scan with the normal contrast.
Select to scan with a contrast between the normal contrast and the darkest contrast.
Select to scan with the darkest contrast.
1
Load the document.
2
Press [Fax] on My MFP Menu screen.
If My MFP Menu screen is not displayed, press <Mode> repeatedly until “Fax Ready” screen is
displayed.
3
Press [Contrast].
If [Contrast] is not displayed, press [Advanced] and then [Contrast].
4
Select the desired contrast, and press [Enter].
5
Specify the destinations, and press <Start>.
• For details on specifying the destinations, see “Specifying destinations” (page 5-2) .
• If you loaded the document in the automatic document feeder, this concludes the procedure.
• If you loaded the document on the document glass, the message “Set next document.” is
displayed when the loaded documents have been scanned. Load the next document, and
press [Next Doc]. Press [Tx Start] to start transmission.