QUAD ACCESS MFX-3590 Scanner And Fax Manual Download Page 196

Page: 196 / 218

1
2
3
4
5
6

Specifying default settings 7-35

Machine settings

Function

Description

Settings

File Format

This sets the default file format
used when a scanned document is
saved.

NOTE

If you have changed the file format
in the default e-mail settings

(page

7-38)

, this setting is also changed.

Mono: TIFF

PDF

PDF w/Password

Color: JPEG

PDF

PDF w/Password

PDF w/ Password

Encryption Level: Low (40-bit RC4),

High (128-bit RC4),
High (128-bit AES)

Printing:

Allowed, Not allowed

Editing:

Allowed, Not allowed

Copying:

Allowed, Not allowed

Stamp function is optional.

This function is available only when it is activated. To enable it, contact your local technical
representative.

NOTE

Underlined values are the default settings specified at the time of shipment.

Summary of Contents for MFX-3590



























































































































































































































Search results

Summary of Contents for MFX-3590

Reviews:

QUAD ACCESS MFX-3590, Scanner And Fax Manual, Page: 196 / 218

Search results

Summary of Contents for MFX-3590

Reviews: