Qorvo PAC25140, User Manual

Page: 50 / 77

PAC25140 Users Guide Preview
No portion of this document may be reproduced or reused in any form without Qorvo’s prior written consent
www.qorvo.com
Rev. 1.0.0 28 February 2023 © 2023 Qorvo US, Inc.
50 of 77
SOC.SIGMGRCTL1
Register 8-12
. SOC.SIGMGRCTL1 (Signal Manager Control 1, SOC 0x11)
BIT NAME ACCESS RESET DESCRIPTION
7:5 RFU R 0x0 Reserved
4 DAEN R/W 0x0
Current Sense
Differential Amp
Enable
3 SCPEN R/W 0x0
Short Circuit
Protection DAC and
Comparator Enable
2 OCCEN R/W 0x0
Over Current Charge
Protection DAC and
Comparator Enable
1 OCDEN R/W 0x0
Over Current
Discharge Protection
DAC and Comparator
Enable
0 BATOVEN R/W 0x0
Battery Over Voltage
DAC and Comparator
Enable
Note: This register requires a write of PROT_KEY before register can be written.
SOC.SIGMGRCTL2
Register 8-13
. SOC.SIGMGRCTL2 (Signal Manager Control 2, SOC 0x12)
BIT NAME ACCESS RESET DESCRIPTION
7:3 RFU R 0x0 Reserved
2 PBPTEN R/W 0x0
Push Button Pass
Through Enable
1 IADCEN R/W 0x0 Current ADC Enable
0 VADCEN R/W 0x0 Voltage ADC Enable
SOC.PROTEN
Register 8-14
. SOC.PROTEN (Reset Status, SOC 0x13)
BIT NAME ACCESS RESET DESCRIPTION
7:6 RFU R 0x0 Reserved
5 SCPCPROTEN R/W 0x0
Short Circuit
Protection CHG
Protection Enable
– If enabled, then
when protection is
activated the CHG
FET will be disabled
4 SCPDPROTEN R/W 0x0
Short Circuit
Protection DSG
Protection Enable
– If enabled, then
when protection is
activated the DSG
FET will be disabled
3 OCCPROTEN R/W 0x0
Over Current CHG
Protection Enable
– If enabled, then
when protection is
activated the CHG
FET will be disabled
2 OCDPROTEN R/W 0x0
Over Current DSG
Protection Enable
– If enabled, then
when protection is
activated the DSG
FET will be disabled
1 BATOVCPROTEN R/W 0x0 Battery Over Voltage