Enterprise Multi-WAN VPN QoS Router
49
Internet IP addresses). Select WAN1 from the pull-down option list “Interface”, and then
click “Enable”. Finally, click “Add New” and the rule will be added to the mode. The device
will transmit packets that are not going to Port 80 to the Internet through WAN1.
Configuring “Assigned Routing Mode” for load Balance
：
IP Group: This function allows users to assign packets from specific Intranet IP
addresses or to specific destination Service Ports and to specific destination IP addresses
through an assigned WAN to the Internet. After being assigned, the specific WAN will only
support those assigned Intranet IP addresses, destination Service Ports, or destination IP
addresses. Those which are not configured will go through other WANs for external
connection. Only when this mode is collocated with “Assigned Routing” can it bring the
function into full play.
Example 1
：
How do I set up the Assigned Routing Mode to keep all Intranet IP addresses from
going through WAN2 when the destination is Port 80, and keep all other services from going
