Enterprise Multi-WAN VPN QoS Router
37
Attention: When assigning mode is selected, as in the above example, the IP(s) or
service provider(s) configured in the connection rule will follow the rule for external
connections, but those which are not configured in the rule will still follow the device
Load Balance system to go through other WAN ports to connect with the Internet.
Please refer to the explanations in
6.2.3 Configuring Protocol Binding
for setting up
Protocol Binding and for examples of collocating router mode with Protocol Binding.
Strategy Routing Mode
If strategy Routing is selected, the device will automatically allocate external connections
based on routing policy (Division of traffic between Telecom and Netcom is to be used in China)
embedded in the device. All you have to do is to select the WAN (or WAN group) which is
connected with Netcom; the device will then automatically dispatch the traffic for Netcom through
that WAN to connect with the Internet and dispatch traffic for Telecom to go through the WAN
connected with Telecom to the Internet accordingly. In this way, the traffic for Netcom and
Telecom can be divided.
Set WAN Grouping:
If more than one WAN is connected with Netcom, to apply a similar division of traffic
policy to these WANs, a combination for the WANs must be made. Click “Set WAN Grouping”;
an interactive window as shown in the figure below will be displayed.
