Enterprise Multi-WAN VPN QoS Router
42
In addition, do not input the same web address in this box for
two different WANs.
Note
!
In the load balance mode for Assigned Routing, the first WAN port (WAN1) will be saved
for the traffic of the IP addresses or the application service ports that are not assigned to
other WANs (WAN2, WAN3, and WAN4). Therefore, in this mode, we recommend assigning
one of the connections to the first WAN. When other WANs (WAN2, WAN3, or WAN4) are
broken and connection error remove (Remove the Connection) has been selected for the
connection detection system, traffic will be shifted to the first WAN (WAN1). In addition, if
the first WAN (WAN1) is broken, the traffic will be shifted to other WANs in turn. For
example, the traffic will be shifted to WAN2 first; if WAN2 is broken too, the traffic will be
shifted to WAN3, and so on.
6.2.3 Protocol Binding
Bandwidth Configuration
When Auto Load Balance mode is selected, the device will select sessions or IP and the WAN
bandwidth will automatically allocate connections to achieve load balancing for external
connections. The network bandwidth is set by what users input for it. For example, if the upload
bandwidth of both WANs is 512Kbit/sec, the automatic load ratio will be 1:1; if one of the upload
bandwidths is 1024Kbit/sec, while the other is 512Kbit/sec, the automatic load ratio will be 2:1.
Therefore, to ensure that the device can balance the actual network load, please input real upload
and download bandwidths. The section refers to QoS configuration. Therefore, it should be set in
QoS page. Please refer to 8.1 QoS bandwidth configuration.