Enterprise Multi-WAN VPN QoS Router
113
10.1.2.2. Client to Gateway Setting
The following describes how an administrator builds a VPN tunnel between devices.
Users can set this VPN tunnel to be used by one client or by a group of clients (Group VPN)
at the client end. If it is used by a group of clients, the individual setting for remote clients
can be reduced. Only one tunnel will be set and used by a group of clients, which allows easy
setting.
（
1
）
Situation in Tunnel
：
Tunnel No.
：
Set the embedded VPN feature, please select the Tunnel number.
Tunnel Name
：
Displays the current VPN tunnel connection name, such as XXX
Office. Users are well-advised to give them different names to
avoid confusion.
Note:
If this tunnel is to be connected to the other VPN device,
some device requires that the tunnel name is identical to the
name of the host end to facilitate verification. This tunnel can thus
be successfully enabled.
Interface
：
Users may select which port to be the node for this VPN channel.
They can be applied for VPN connections.
Enabled
：
Click to
Enable
to activate the VPN tunnel. This option is set to
Enable by default. After users set up, users may select to
activate this tunnel feature.
