Enterprise Multi-WAN VPN QoS Router
51
Port [TCP&UDP/1~65535]” from the pull-down option list “Service”, and then in the boxes
of “Source IP” input “192.168.1.0 ~ 0” (which means to include all Intranet IP addresses).
In the boxes for “Destination IP” input “211.1.1.1 ~ 211.254.254.254”. Select WAN2 from
the pull-down option list “Interface”, and then click “Enable”. Finally, click “Add New” and
the rule will be added to the mode. The second rule: Select “All Port [TCP&UDP/1~65535]”
from the pull-down option list “Service”, and then in the boxes of “Source IP” input
“192.168.1.0 ~ 0” (which means to include all Intranet IP addresses). In the boxes of
“Destination IP” input “211.1.1.1 ~ 60,254,254,254”. Select WAN2 from the pull-down
option list “Interface”, and then click “Enable”. Finally, click “Add New”, and the rule will be
added to the mode. After the rule has been set up, all traffic that is not going to the
assigned destinations will only be transmitted through WAN1.
