Enterprise Multi-WAN VPN QoS Router
123
passage of NetBIOS broadcast packet. This facilitates the easy connection with other
Microsoft network; however, the traffic using this VPN tunnel will increase.
●
Dead Peer Detection (DPD): If this option is selected, the connected VPN tunnel will
regularly transmit HELLO/ACK message packet to detect whether there is connection
between the two ends of the VPN tunnel. If one end is disconnected, the device will
disconnect the tunnel automatically and then create new connection. Users can
define the transmission time for each DPD message packet, and the default value is
10 seconds
Situation in Group VPN
：
Group No.
：
Two Group VPN settings at most.
Group Name
：
Displays the current VPN tunnel connection name, such as
XXX Office. Users are well-advised to give them different
names to avoid confusion.
Note:
If this tunnel is to be connected to other VPN device,
some device requires that the tunnel name is identical to the
name of the host end to facilitate verification. This tunnel can
thus be successfully enabled.
Interface
：
From the pull-down list, users can select the Interface for this
VPN tunnel.
Enabled
：
Click to
Enabled
the VPN tunnel. This option is set to Enabled
by default. After the set up, users may select to activate this
tunnel feature.
