Enterprise Multi-WAN VPN QoS Router
71
Bandwidth
Assign Type
：
Sharing total bandwidth with all IP addresses: If this option is
selected, all IP addresses or Service Ports will share the bandwidth
range (from minimum to maximum bandwidth).
Assign bandwidth for each IP address: If this option is selected, every
IP or Service Port in this range can have this bandwidth (minimum to
maximum). For example, If the rule is set for the IP of each PC, the IP
of each PC will have the same bandwidth.
Attention: If “Share-Bandwidth” is selected, be aware of the actual
usage conditions and avoid an improper configuration that might
cause a malfunction of the network when the bandwidth is too small.
For example, if users do not want an FTP to occupy too much
bandwidth, users can select the “Share-Bandwidth Mode”, so that no
matter how much users use FTPs to download information, the total
occupied bandwidth is fixed.
Enable
：
Activate the rule.
Add to list
：
Add this rule to the list.
Move up & Move
down
：
QoS rules will be executed from the bottom of the list to the top of the
list. In other words, the lower down the list, the higher the priority of
execution. Users can arrange the sequence according to their
priorities. Usually the service ports which need to be restricted, such
as BT, e-mule, etc., will be moved to the bottom of the list. The rules
for certain IP addresses would then be moved upward.
Delete selected
items
：
Remove the rules selected from the Service List.
Show Table
：
Display all the Rate Control Rules users made for the bandwidth.
Click
“Edit”
to modify.
Apply
：
Click
“Apply”
to save the configuration
Cancel
：
Click
“Cancel"
to leave without making any change.
Show Table
：
