QNO 4WAN User Manual Download Page 215

Page: 215 / 217

Enterprise Multi-WAN VPN QoS Router

208

Though these basic operations can help solve the problem but Qno's technical engineers

suggest that further measures should be taken to prevent the ARP attack.

1. Deal with virus source as well as the source device affected by virus through virus killing

and the system re-installation. This operation is more important because it solves the source PC

which is attacked by ARP. This can better shelter the network from being attacked.

2. Cyber café administrators should check the LAN virus, install anti-virus software (Ginshan

Virus/Reixin must update the virus codes) and conduct virus scanning for the device.

3. Install the patch program for the system. Through Windows Update, the system patch

program (critical update, security update and Service Pack)

4. Provide system administrators with a sophisticated and strong password for different

accounts. It would be best if the password consists of a combination of more than 12 letters,

digits, and symbols. Forbid and delete some redundant accounts.

Summary of Contents for 4WAN


























































































































































































































Search results

Summary of Contents for 4WAN

Reviews:

Related manuals for 4WAN

Brands by name

Popular brands

QNO 4WAN, User Manual

Search results

Summary of Contents for 4WAN

Reviews:

Related manuals for 4WAN

Brands by name

Popular brands