QMS Magicolor 2 plus, Manual

Page: 43 / 90

'(
'( )* ) %
Optional emulations, such as CGM, LN03 Plus, and XES/UDK, are available as Post-
Script files on floppy disks. This section describes how to download an optional emu-
lation to the printer’s hard disk.
» Note: You must have at least one hard disk, internal or external, attached to the
printer in order to use an optional emulation. If more than one hard disk is available,
the emulation automatically installs itself on the disk with the most free storage space.
QMS recommends that you have at least 4 MB of memory above the base
configuration and that you add at least 1 MB memory to each emulation installed. This
ensures that the printer can run the emulation without slowing down performance.
$ %&
'
We recommend that you use CrownAdmin to download an emulation. Refer to the
CrownAdmin online help for instructions.
'!!!!("
1 Turn on the printer, and wait for
IDLE
to appear in the message window.
2 Insert the emulation disk in your PC’s 3.5" disk drive, and change to that
drive (for example, if you’re using the A drive, type
a:
↵
).
3 Send the emulation to the printer’s hard disk.
If your PC and printer are connected through the parallel port, type
copy /b *.ps lpt#
↵
where
#
is 1 to 3. (
/b
refers to binary files.)
If your PC and printer are connected through the serial port, type
copy /b *.ps com #
↵
where
#
is 1 to 4. (
/b
refers to binary files.)