QMS 1725E, Reference

Page: 76 / 288

Emulations
QMS 1725E Print System Reference 4-40
Font
Sets the printer fonts for the current print job.
Point Sz 100ths
Sets point size (in .01 point increments) of the font for the current print
job.
Character Map
Specifies the type of character map to be used.
Line Numbering
Specifies if a five-digit number is to be prefixed to the beginning of
each line.
Menu Administration/Emulations/Lineprinter/Font
Choices All printer-resident PostScript fonts.
Default Courier
Notes Any PostScript fonts available on the printer can be used. To
see a list of available PostScript fonts, print an advanced
status page through the printer configuration menu
(Administration/Special Pages/Status Page Type) or through
the PS Executive Series Utilities.
Menu Administration/Emulations/Lineprinter/Point Sz 100ths
Choices 00400-25600 (4-256 points)
Default 00880 (8.8 points)
Menu Administration/Emulations/Lineprinter/Character Map
Choices ASCII, EBCDIC
Default ASCII
Menu Administration/Emulations/Lineprinter/Line Numbering
Choices On—Number all lines.
Off—Don’t number lines.
Default Off