QMS 1725E, Reference

Page: 156 / 288

Intellifont SIMM
QMS 1725E Print System Reference 6-26
Increasing the Disk Cache Size
If your printer has 12 MB of RAM or less, you must set the disk cache
to a minimum of 48 KB (Administration/Memory/Disk Cache menu) to
use the Intellifont SIMM.
» Note: You may need to decrease one of the other memory clients before
increasing the disk cache client, or add more memory.
If your printer has more than 12 MB RAM, the size of the disk cache is
automatically adjusted.
Verifying the Installation
Once you have installed the Intellifont SIMM, print a start-up page
and an advanced status page to verify the installation.
1 Wait for the printer message window to display
IDLE
.
2 If necessary, use the Administration/Startup Options/Startup
Page menu to enable start-up pages.
3 Turn the printer off and back on again.
In the Options section of the start-up page, a new option identi-
fied as
%cartridge2%
verifies the installation of the SIMM.
4 If necessary, use the Administration/Special Pages/Status
Page Type menu to change the default Standard setting to
Advanced.
5 Print an Advanced Status Page (Administration/Special
Pages/Status Page Type selection, followed by Administra-
tion/Special Pages/Print Status).
The list of HP PCL fonts includes all of the new Intellifont fonts.
Keep this status page for reference when accessing these fonts.
Font List
The following 37 fonts are now available for use. They can be auto-
matically rotated to landscape orientation. All fonts are scalable and
available in 35 symbol sets unless otherwise noted.