QMS 1725E, Reference

Page: 123 / 288

End Job Mode
5-23 Additional Technical Information
Adding an EOD Command to Your File
When adding an EOD command to your file, use the syntax for the
selected EOD command exactly as written (the command's syntax is
case sensitive).
» Note: <ESC> represents the escape character. (The decimal value for the
escape character is 027, and the hexadecimal value is 1B.) How you enter
the escape character depends on your application. Some applications allow
you to press and hold the ALT key and then type 027 to enter the escape
character, while others allow you to type certain character sequences to
represent the escape character. See your computer or application
documentation to find out how to enter the escape character on your
system.
» Note: The <CR><LF> sequence following the %%EndOfDocument line for the
QMS EOD is necessary to avoid an INPUT IDLE message remaining in the
printer message window after the document finishes printing.
Next Advances to the appropriate option (QMS
EOD, HP EOD, or None).
END JOB MODE
OPTION
Select Selects the option.
OPTION
IS SELECTED
Returns to the Parallel (or Serial)/End Job
Mode menu.
PARALLEL/SERIAL
END JOB MODE
Online/
Offline Asks you if you want to save your
change.
SAVE CHANGES?
NO
Next Advances to the Yes option.
SAVE CHANGES?
YES
Select Saves your change and idles the printer.
IDLE
Online/
Offline Puts the printer back on line.
IDLE
For this EOD command... Use this syntax...
QMS EOD
HP EOD
%%EndOfDocument
<CR><LF>
<ESC>%-12345X